The Si5351A is a relatively recent clock-generator chip manufactured by SiLabs. It can produce three simultaneous independent 50-ohm impedance, squarewave outputs between 8kHz and 160MHz. Configuration of the chip is via a microcontroller with I2C (two-wire) interface.

This Si5351A synthesiser module kit (or "breakout board") runs from a 5V or 3.3V supply. The tiny 0.5mm pin-spaced Si5351A chip is pre-soldered to the PCB at the factory. The PCB size is 1.3 x 1 inches (33 x 25mm). The remaining components are all through-hole components so construction is easy. The circuit contains a 3.3V regulator and I2C level converters, for use with 5V microcontroller systems. The kit may also be built without the level converters or regulator, for use in 3.3V systems. The kit has a 2 x 10-pin 0.1-inch header for all connections. Additionally pads are provided on the PCB for soldering SMA connectors if you wish. The kit uses a 27MHz crystal as the reference oscillator.

NOTE: The kit is now PCB Rev 6, which has the same functionality but most of the components are now SMD; the only components to be installed are the crystal and pin headers.

NOTE: A 25MHz TCXO option is available that provides excellent frequency stability compared to the stock 27MHz crystal. Si5351A Rev 5 boards are designed to fit this TCXO perfectly sitting on the board as described in the Rev 5 assembly manual.

CLICK HERE to download assembly instructions and for further information.

Write a review

Note: HTML is not translated!
    Bad           Good

Si5351A synthesizer module kit

  • Product Code: Synth
  • Availability: 59
  • $7.75


Available Options


Related Products

Ultimate3S QRSS/WSPR kit

Ultimate3S QRSS/WSPR kit

The Ultimate3S QRSS/WSPR Transmitter Kit transmits various QRSS, Hell, Opera, PI4 and WSPR slow-signal modes on any LF, MF, HF or VHF band (all amateur bands from 2200m to 2m or 222MHz). Thi..

$35.99

Deluxe 6-band U3S set

Deluxe 6-band U3S set

This is a deluxe set of kits containing all the kits you need to build a smartly boxed, GPS-disciplined, 6-band QRSS/WSPR modes transmitter using the Ultimate3S. Deluxe set contents: The Ultimat..

$136.99

VFO/Signal Generator kit

VFO/Signal Generator kit

Full description on the QRP Labs VFO kit page. The Si5351A VFO/Signal Generator kit provides two independent output freqeuncies, 3.3V peak-peak squarewave and in the range 3.5kHz to 200MHz (Si5351A..

$35.99

HF Sinewave VFO/SigGen set

HF Sinewave VFO/SigGen set

This is a set of all the kits you need to build the sinewave output signal generator described in App Note AN006. Using VFO kit firmware s1.03 or above, the firmware can operate the VFO/SigGen kit wit..

$79.59