NOTE: The QLG2 module kits is currently out of stock, estimated availability is end-April 2021. If you order this option, your order shipment will be delayed until the QLG2 module kits are available. If you want your order to be split into two parts please make a separate order involving the QLG2 module kit http://shop.qrp-labs.com/qlg2
Full description on the QRP Labs VFO kit page.
The Si5351A VFO/Signal Generator kit provides two independent output freqeuncies, 3.3V peak-peak squarewave and in the range 3.5kHz to 200MHz (Si5351A datasheet spec). An extended range up to 292MHz has been experimentally measured. One output is variable and rotary encoder tuned, the other is fixed (configurable frequency).
The kit comprises:
- Main controller PCB with LCD module and all components
- Si5351A or OCXO/Si5351A (see note below) synthesiser module kit (Si5351A chip is pre-soldered at the factory)
- Rotary encoder and short length of 4-way ribbon cable to connect it (note: pictured plastic knob is NOT included)
The kits are easy to build, with through-hole components only (no surface mount soldering - the Si5351A chip is pre-soldered at the factory).
NOTE regarding the OCXO option: The VFO/Signal Generator kit INCLUDES the standard Si5351A module kit. Optionally you can also purchase the OCXO/Si5351A module kit, which is plug-in compatible with the VFO/Signal Generator. The OCXO/Si5351A kit has high frequency stability. However, the OCXO/Si5351A kit is more difficult to build and adjust than the other kits. If you want to build the OCXO kit, we recommend that you build the standard Si5351A kit first, and get everything working, THEN build the OCXO/Si5351A kit. In general the standard Si5351A module kit is good enough, particularly if you are using a GPS for frequency calibration and drift correction. You would only need the OCXO/Si5351A module kit if you want to operate in an environment with wildly changing temperatures, or you do not want to use GPS for drift correction, or if you have some particular requirement for extreme freuqency stability, or if you are a perfectionist or just want the challenge and interesting OCXO kit!
NOTE regarding the GPS option: Connecting a GPS like the QRP Labs QLG2 kit is a very nice and inexpensive addition to the VFO/Signal Generator kit. The GPS provides the initial frequency calibration as well as regular drift correction.
A drilled, cut, silk-screen printed enclosure is available (click checkbox above when ordering), with an accessories kit containing connectors, buttons/switches, and mounting hardware. See the VFO/SigGen case page for details.
A 20mm knob is available to suit the rotary encoder in this kit, please see the checkbox above or check http://shop.qrp-labs.com/knob
VFO/Signal Generator kit
- Product Code: VFO
- Availability: 45