This relay-switched LPF board kit can have up to five additional LPF's plugged in, permitting the Ultimate3 and Ultimate3S QRSS/WSPR kits to sequence between 6 bands (including the LPF on the main U3/U3S board). The board size is 80 x 37mm, the same as the U3, so the boards stack together using four 25mm hex spacers. The plug-in LPF modules are available separately, click here. This relay-switched filter kit can also be used with the plug-in BAND pass filter (BPF) kits

The kit can also be used with your homebrew radio projects!

Please CLICK HERE to download the assembly instruction manual and for more information (opens the main relay-switched filter board page).

The photos show the relay-switched LPF board plugged into the back of the U3 kit. Note that my photos below show NO additional LPF's plugged in (as I only had one built LPF at the time of those photos).

Write a review

Note: HTML is not translated!
    Bad           Good

Ultimate relay-switched LPF kit

  • Product Code: ULPF
  • Availability: 27
  • $16.00


Related Products

Ultimate3S QRSS/WSPR kit

Ultimate3S QRSS/WSPR kit

The Ultimate3S QRSS/WSPR Transmitter Kit transmits various QRSS, Hell, Opera, PI4 and WSPR slow-signal modes on any LF, MF, HF or VHF band (all amateur bands from 2200m to 2m or 222MHz). Thi..

$35.99

Deluxe 6-band U3S set

Deluxe 6-band U3S set

This is a deluxe set of kits containing all the kits you need to build a smartly boxed, GPS-disciplined, 6-band QRSS/WSPR modes transmitter using the Ultimate3S. Deluxe set contents: The Ultimat..

$136.99

Band Pass Filter kit

Band Pass Filter kit

This Band Pass Filter (BPF) kit is for receiver input filtering. It uses the popular double-tuned-circuit which is reliable and easy to build, without needing access to any special equipment..

$4.90

Band Pass Filter kit set

Band Pass Filter kit set

This item is a set of 10 band pass filters (BPF), one for each of the HF bands 160, 80, 60, 40, 30, 20, 17, 15, 12 and 10m. The filters are designed for receiver input filtering and use the ..

$49.00

HF Sinewave VFO/SigGen set

HF Sinewave VFO/SigGen set

This is a set of all the kits you need to build the sinewave output signal generator described in App Note AN006. Using VFO kit firmware s1.03 or above, the firmware can operate the VFO/SigGen kit wit..

$79.59

10W HF Linear PA

10W HF Linear PA

10W HF Linear Power Amplifier. Comfortably produces 10W from 12V supply. Compact design with huge heatsink included, which will not overheat even on continuous 100% duty-cycle operation. 26dB gain wit..

$26.00